LiteratureCase StudiesNews & EventsContact Us
Product Details
Components > Primers

Restore & prepare
concrete substrates

Sika Component Products

Every successful flooring system begins with proper surface preparation. To help you in this important step, Sika Industrial Flooring offers a full range of primers that are fully compatible with our decorative and industrial floor and coating systems.

  • Primers for every application
    > moisture- and oil-tolerant formulations
    > primers for vinyl, steel, concrete & previous coated areas
  • Low odor, ultra low VOC; may be installed in occupied areas
  • Compatible with Sikafloor flooring systems
Primers

Specialty primers

Sikafloor® 107 Low Modulus, Low Viscosity Epoxy Primer
A two-component high solids, low modulus, low viscosity epoxy primer. This epoxy primer is
specially formulated to form a tough flexible film. This resilient primer has stress relieving and
moisture tolerant properties. Sikafloor 107 is designed as a primer for Sikafloor epoxy and urethane coatings as well as the broadcast and troweled systems. Sikafloor 107 should be considered where UV exposure is a concern.

Data Sheet MSDS (Resin) MSDS (Hardener)

Sikafloor® 105 Epoxy Epo-Rok Mortar Primer
A two-component, penetrating 100% solids, light amber, epoxy-based primer/bond coat. Designed for use as a primer/bond coat specifically in conjunction with Sikafloor Epo-Rok® epoxy mortar system. Formulated to penetrate and reinforce the concrete substrate in addition to ensuring a tenacious bond between the Sikafloor Epo-Rok epoxy mortar and the concrete floor.

Data SheetMSDS (Resin) MSDS (Hardener)

Sikafloor® FTP Moisture Resistant Primer
A three-component, 36% solids, waterborne-epoxy. As a green concrete primer, Sikafloor FTP will allow Sikafloor systems to be applied to properly designed green concrete inside the typical 28 day concrete curing window. This primer is specially formulated for superior penetration and adhesion to a green concrete slab. Primer application within eight (8) hours of pour eliminates the need for shotblasting of acceptably designed concrete. Sikafloor FTP seals the surface of the slab and can act as a concrete curing compound to improve the physical properties of the concrete by allowing proper hydration.

Data SheetMSDS (Resin) MSDS (Hardener)

Sikafloor® 100 ESD Conductive Black Epoxy Primer (Formerly ESD PR-1)
A two-component epoxy resin conductive primers. Each are designed for use beneath designated Sikafloor ESD epoxy coatings and resurfacers to impart electrostatic control properties in the conductive range of 25,000 to 1 million ohms surface resistance. They are useful on a variety of substrates, including existing non-conductive coatings or resurfacers and primed concrete.

Data Sheet  • MSDS (Resin) MSDS (Hardener)

Sikafloor® 101 ESD Low VOC Conductive Black Epoxy Primer (Formerly ESD PR-1250)
A two-component epoxy resin conductive primer complaint to a 250 g/l VOC restriction. Each are designed for use beneath designated Sikafloor ESD epoxy coatings and resurfacers to impart electrostatic control properties in the conductive range of 25,000 to 1 million ohms surface resistance. They are useful on a variety of substrates, including existing non-conductive
coatings or resurfacers and primed concrete.

Data Sheet • MSDS Coming Soon

Sikafloor® 111 ESD Water Based Conductive Black Epoxy Primer (Formerly ESD 910 GPRC)
A two-component water based, solvent free, epoxy resin conductive primer. It is designed
primarily to be used with Sikafloor 211 ESD epoxy self leveling slurry to impart electrostatic control properties in the conductive of 25,000-1 million ohms surface resistance.. This primer is useful on a variety of substrates, including existing non-conductive coatings or resurfacers and primed concrete.

Data Sheet • MSDS Coming Soon

Sikafloor® 13 Pronto Low Viscosity MMA Primer (Formerly MMA PR 01)
A reactive, acrylic resin based on methyl methacrylate (MMA). Its low viscosity and excellent strength allow it to penetrate and reinforce concrete substrates. Applying this fast-curing primer to properly prepped concrete is the first step to the installation of all Sikafloor Pronto MMA flooring systems.

Data Sheet MSDS

Sikafloor® 301 Urethane Primer Additive (Formerly MMA CBA)
A urethane based additive. It is designed only to be used with Sikafloor 13 Pronto primer. It will greatly increase the ability of the primer to bond to concrete that contains elevated moisture composition or other contaminants that might weaken the ability to bond properly.

Data Sheet • MSDS Coming Soon

 

 

 

 

 

Sika Family of Sites © Sika Corporation | Legal notice