Restore & prepare
concrete substrates

SikaQuick® 1000 Rapid Hardening Repair Mortar w/ Extended Working Time

A one-component, rapid hardening, early strength gaining, cementitious, patching material for concrete.

- Use on grade, above, and below grade on concrete.
- Highway overlays and repairs.
- Structural repair material for concrete roadways, parking structures, bridges, dams and ramps.
- Full depth patching repairs.
- Economical patching material for horizontal repairs of concrete and mortar.

Data Sheet • MSDS Sheet

SikaQuick® 2500 Very Rapid Hardening Repair Mortar

A one-component, very rapid hardening, early strength gaining, cementitious, patching material for concrete.

- Use on grade, above, and below grade on concrete.
- Highway overlays and repairs.
- Structural repair material for concrete roadways, parking structures, bridges, dams and ramps.
- Full depth patching repairs.
- Economical patching material for horizontal repairs of concrete and mortar.

Data Sheet • MSDS Sheet

Sikafloor® 104 Epoxy Patching Mortar

A high solids, three component epoxy patch kit. It consists of a Resin and a Hardener and a specially blended bag of aggregate. Designed for patching and repairing worn and eroded concrete floors in a variety of industries from light to heavy duty. Can be mixed and applied on the job site at a 1/4 inch (6mm) or greater. Formulated to repair and protect concrete floor areas that have been subjected to the harsh effects of abrasive traffic and strong chemical spillages.

Data Sheet • MSDS (Resin) • MSDS (Hardener) • MSDS (Part C)

Sikafloor® 130 General Purpose Resurfacer Patch Kit

Sikafloor 130 resurfacer is a monolithic epoxy floor topping primarily designed for power troweling. It is also suitable for patching floor irregularities. The minimum application thickness is 3/16”. Sikafloor 130 is ideal for restoring old or worn concrete or as a protective overlay on new concrete. Designed for overlaying new and resurfacing worn concrete floors in light to heavy duty industrial application. For Facilities requiring a dense surface with high abrasion and impact resistance, and in need of a higher compressive, tensile, and flexural strength. Areas exposed to industrial traffic from steel wheeled carts and forklift trucks.

Data Sheet • MSDS (Resin) • MSDS (Hardener)

Sikadur Injection Gel

Sikadur Injection Gel is a 2-component, 100% solids, moisture tolerant, high modulus, high strength, structural epoxy. When mixed it gives a smooth, non-abrasive, paste adhesive. It conforms to the current ASTM C-881 and AASHTO M-235 specifications.

Data Sheet • MSDS (Part A) • MSDS (Part B)