A unique approach to
electrostatic control
Conductive & Static Dissipative Flooring Systems
In industries where electronic components or volatile chemicals are involved, electrostatic discharge can result in significant damage, injury and financial loss.
Even when people are equipped to handle static-sensitive devices and a facility's flooring system meets the basic standards for draining static charge, inadvertent contact can occur. How? The first step is understanding how much charge your facility floor needs to dissipate. This factor can differ greatly by BVG (Body Voltage Generation).
There’s only one way to get a flooring system that offers the lowest BVG reading and highest level of protection for your products — Sikafloor ESD flooring systems.
- Outstanding static control throughout entire flooring thickness
- Absolute performance and aesthetic versatility for the most demanding applications; may be applied over concrete, vinyl tile or existing polymers
- Easy maintenance; low cost, quick, one-coat repairability
- Low VOC systems
- Proprietary, patented technologies developed by ESD flooring experts
Sikafloor's patented ESD floor products offer a truly unique approach to controlling electrostatic discharge. The Sikafloor ESD line of particulate coatings provides optimum ESD protection, and is the only complete line of ESD Control polymer systems in the industry.
"Green" ESD products are available. Please refer to individual technical data sheets, or contact your area sales representative.
| sikafloor® ESD control Systems |
> STATIC DISSIPATIVE (SD) : 1x106to 1x109 Sikafloor® ESD Control PrimersCONDUCTIVE black epoxy primer for use in combination with Sikafloor ESD LDR 610, ESD rs 950, ESD EN 7000 and ESD 1000 HB. - ESD PR-1 (<400 g/L VOC): Data Sheet Sikafloor® ESD PR-2 / PR-2250 CONDUCTIVE black epoxy primer for use in combination with Sikafloor ESD EP 3000. - ESD PR-2 (<400 g/L VOC): Data Sheet Sikafloor® ESD PR-3 STATIC DISSIPATIVE black epoxy primer for use in combination with Sikafloor ESD LDR 610 and ESD rs 950. Zero VOC. - ESD PR-3 (0 g/L VOC): Data Sheet Sikafloor® ESD 910 GPRD STATIC DISSIPATIVE black water based epoxy primer for use in combination with Sikafloor ESD 910 and ESD 510 epoxy self leveling slurries and self levelers. - ESD 910 GPRD: Data Sheet Sikafloor® ESD Control ResurfacerSikafloor® ESD 950 3/16" (187.5 mils) power-trowelable ESD control resurfacer. Low odor, low VOC (50 g/L). May be topcoated with any Sikafloor ESD control coating below to produce a static dissipative or conductive finished floor. - ESD 950 High Performance Resurfacer: Data Sheet Sikafloor® ESD Control Slurry SystemsSikafloor® ESD 510 C 50 mil self-leveling epoxy ESD control slurry for concrete substrates, offered in conductive formulation. Low odor. Produces a smooth, high gloss finish. Good adhesion to concrete. Excellent impact resistance. - ESD Conductive: data sheet coming soon! 60-90 mil ESD control slurry system, offered in conductive or static dissipative formulations. Low odor, low VOC (50 g/L). Produces a smooth, high gloss reflective finish. - ESD 910 Conductive: Data Sheet Sikafloor® ESD Control CoatingsSikafloor® ESD EP 1000 HB C/SD EPOXY | ESD control coating (10-20 mil) for concrete substrates, offered in conductive or static dissipative formulations. Produces a smooth, glossy finish. Good adhesion, physical and chemical resistant properties. Excellent impact resistance. - ESD EP 1000 HB Conductive: Data Sheet Sikafloor® ESD EP 3000 C/SD or 3250 EPOXY | ESD control coating (10-20 mil) for concrete and steel substrates, offered in conductive or static dissipative formulations; optional reduced VOC formulation available (ESD 3250). Produces a glossy finish with slight orange peel. Excellent adhesion, physical and chemical resistant properties. Excellent impact resistance. - ESD EP 3000 Conductive: Data Sheet Sikafloor® ESD EN 7000 EPOXY NOVOLAC | Chemical resistant ESD control coating (10-15 wet mils) for concrete and steel substrates, offered in conductive and static dissipative formulations. Superior chemical resistance, including 98% sulfuric, 37% hydrochloric, and 20% acetic acids. - ESD EN 7000: Data Sheet Sikafloor® ESD UR 5000 SD/ 5250 URETHANE | UV-stable, chemical resistant aliphatic polyester urethane ESD control coating (4 mils), offered in standard and reduced VOC static dissipative formulations. Produces a __ finish. Excellent adhesion, physical and chemical resistant properties. - ESD UR 5000 Static Dissipative: Data Sheet Sikafloor® ESD WBUR 7050 C / SD URETHANE, WATERBORNE | Ultra low VOC (50 g/L), low odor, UV-stable, waterborne aliphatic urethane ESD control coating (4-5 wet mils, 2.1-2.6 dry mils), suited for application to floors, walls and ceilings. Offered in conductive and static dissipative formulations. Produces a satin finish. Excellent adhesion and physical properties. Good chemical resistance properties. - ESD WBUR 7050 Conductive: Data Sheet |
APPLICATIONS:
Industrial & Manufacturing
- chemical processing
- electronics
- food (cereal/grain plants)
- manufacturing, heavy
- manufacturing, light
- petroleum refineries
- pharmaceutical production
Transportation
- aircraft hangars
- fuel cell maintenance
Common Areas
- aisleways/corridors
- chemical & solvent areas
- clean rooms
- computer rooms
- corridors
- laboratories
- mechanical rooms
- traffic aisles






